Projector throw distance and screen size calculator
Pick a projector from our range and see where it goes for your screen size, how bright the picture looks and where to sit — worked out from the maker’s throw ratio and lumens, drawn to scale.
Planning forBenQ TK710STi – 4K HDR Short Throw Smart Projector
Where it goes & how bright it looks
Based on this projector's rated 3200 lumens and throw ratio 0.69–0.83 from the manufacturer. Rated lumens are measured in the brightest picture mode — movie and eco modes are dimmer, and output drops as the lamp or laser ages. The side view assumes the screen bottom is 2 ft off the floor. Treat this as a planning guide and confirm final placement with the manufacturer's installation manual. Not sure? Ask us before you mount anything.
Good to know
How far should I sit from a 120-inch screen?
THX recommends a 36° viewing angle, at most 40°. For a 120″ 16:9 screen (8.7 ft wide) that is about 13.4 ft from your eyes to the screen, 12.0 ft at 40°, and 16.3 ft at SMPTE’s 30° minimum.
How is throw distance worked out?
Throw distance = the projector’s throw ratio × the picture width. The calculator uses the manufacturer’s throw ratio range, so a zoom lens gives you a range of positions and a fixed lens one spot.
Every figure here is an estimate from the manufacturer's published specifications and standard room acoustics. Planning a full room? Plan my home theatre · Check compatibility