Ask AV Kart

Real buyer questions, answered. No sponsored picks, no invented enthusiasm — the same answers we give on WhatsApp every day.

I'm not in Delhi. Can you still deliver, install and support it?

Short answer: yes. Our store is in New Delhi, but we supply, install and calibrate systems across India.

delivery-installation
Can I buy speakers without hearing them first?

Yes, people do it every day and many are happy with the result. But treat it as a risk to manage, not a coin toss. Spending a large amount on something you have never heard feels uncomfortable, and that instinct is sensible.

buying-guide
With about ₹1 lakh, should I build a 2.1 system or a small 5.1?

At this budget, I would usually start with a good 2.1 system and keep the door open for surround later. A small 5.1 at the same money spreads the budget thin, and the front speakers do most of the work anyway.

budget
Can I get proper surround sound in an open or L-shaped living room?

Can you? Yes. Will it behave like a closed, rectangular room? No. And that is fine, as long as the layout is planned around what the room actually has.

from-whatsapp
How many Atmos ceiling speakers can my room take?

The short answer: two overhead speakers for a 5.1.2 layout, and four for 5.1.4 or 7.1.4. That is what the AV receiver expects, and in most living rooms two placed properly beat four placed carelessly.

dolby-atmos
My AVR won't go loud: the volume maxes out early or feels capped. What's limiting it?

Usually a setting doing exactly what it was told, and hardware is the last suspect, not the first.

AVR problems
My AVR remote works erratically (or not at all). Fixable?

Cheap checks first, in a fixed order, and most remotes never get past the second one.

AVR problems
The AVR unit itself makes a faint mechanical hum/buzz (not through the speakers). Should I worry?

A faint transformer hum you can hear only with your ear near the unit is normal for anything with a large power supply. If you have to hunt for it, it is not a problem.

AVR problems
Bluetooth to my AVR keeps cutting out or won't pair. What helps?

Bluetooth is the shortest-range, most interference-prone link in your rack, and an AVR (a metal box in a cabinet below the TV) is about the worst-placed device to receive it. So the fixes are mostly about the obstacle course, and the last fix is to stop using it.

AVR problems
What details do you need to quote my home theatre?

Most of the time, "send me the best price" is the first message we get. Fair enough. Price matters.

buying-guide
I see brief rainbow flashes on my projector, especially on white text. What is that?

That is the rainbow effect, a known characteristic of single-chip DLP projectors, and it is not a fault with your unit. It is how the technology draws colour.

Projector tech
Is speaker burn-in real, or am I imagining that my new speakers sound better now?

Both things are true at once, which is why the argument never ends: the speaker changes a little, and you change more.

Hi-Fi & stereo tech
After a power cut my AVR lost its settings (or behaves strangely). Can I prevent or fix this?

Two different situations, and only one of them is worth worrying about.

AVR problems
Can I damage my amplifier or speakers by mismatching impedance (4Ω speakers on an 8Ω amp)?

You can stress an amplifier with a harder load than it is designed for. Speakers, on the other hand, are almost never damaged by impedance itself; they are damaged by clipping from a small amp driven too hard. Keep those two facts separate and the whole topic gets calmer.

Hi-Fi & stereo tech
Zone 2 gives no sound from some sources — TV and streaming work in the main room but not on the Zone 2 speakers. Why?

Almost always a signal-type limitation, not a fault. Zone 2 on most AVRs will only pass certain kinds of audio, and HDMI audio is the one it most often refuses.

AVR problems
I hear pops or loud clicks from the speakers when switching inputs or powering on/off. Is that damaging?

The soft click inside the receiver is a relay doing its job and you can ignore it. Small pops through the speakers at normal volume are common and harmless. Loud cracks on every switch are the one version worth acting on.

AVR problems
There's a small dark blob or coloured spot in my projected image that moves with the picture. What is it?

First localise it: pause on a plain white image, then look at what the artefact does. That one test tells you which of three things you have.

Projector tech
My projector's fan has become loud. Is something wrong?

A projector that has grown louder is telling you about heat, and the message is usually about the filter rather than the fan.

Projector tech
Bi-wiring and bi-amping — what are they, and are they worth doing?

Bi-wiring: skip it. Passive bi-amping from spare AVR channels: try it, it is free. Full active bi-amping: another world, not a weekend job.

Hi-Fi & stereo tech
What is a DAC, and do I need an external one?

A DAC converts digital audio to the analogue signal your amplifier and speakers use, and every digital device you own already has one. So the real question is not whether you need a DAC (you have several) but whether a better one would be audible in your particular chain. Usually the answer is not yet.

Hi-Fi & stereo tech

Not finding your question?

Ask us about your own setup.

Send us the room size and the budget. You get a configuration that works in a room like yours, with real figures — not a list of products. The right HiFi at the right price.

Ask your question on WhatsApp

We answer real questions publicly, first name and city only, and always with your permission.