Three BenQ 4K DLP projectors, the TK705i, TK710 and W2720i, lined up side by side in an Indian living room cinema setup.
Three BenQ 4K DLP projectors, the TK705i, TK710 and W2720i, lined up side by side in an Indian living room cinema setup.

Three BenQ 4K DLP projectors, roughly Rs 2 lakh to Rs 2.89 lakh, all marketed as "4K HDR". So the instinct is simple: the expensive one must be the best, the cheap one must be the one you settle for. That instinct is wrong here, and not in a small way.

These three are not a good, better, best ladder. They are three different tools for three different rooms. Once you see that, the question stops being "which is best" and becomes "best at what, in whose living room".

Let me put my position up front so the rest of this reads in context. The brightest projector is not automatically the best, and the most expensive is not automatically the best. The BenQ TK710 is the brightest and the one I would point at a room with daylight or at big screen sport and gaming. The BenQ TK705i is the cheapest, the smartest out of the box, and the lowest input lag of the three, which makes it the quiet all rounder for a normal Indian living room. The BenQ W2720i gives up some brightness to chase the best contrast and the widest colour, and that trade only pays off in a darker, controlled room built for film.

Start with the lumens argument, because everyone does

On paper the brightness order is clear. BenQ rates the TK710 at 3200 ANSI lumens, the TK705i at 3000, and the W2720i at 2500. All three are manufacturer figures, not something I put a meter to, so read them as BenQ's numbers.

Now the usual advice: more lumens is always better. It isn't. Brightness only matters relative to how much light is fighting your screen.

In a typical Indian living room with windows, tube lights and the curtains open, the extra brightness of the TK710 earns its keep. A daytime image stays watchable instead of washing out to grey. That is a real difference you will see on day one.

In a dark dedicated room, 2500 lumens is already plenty, and here chasing lumens actively costs you. A brighter projector in a black room raises the floor of the blacks and flattens the contrast. The W2720i being the dimmest of the three on paper is not a weakness in that room. It is the point.

So the honest version of the rule: lumens win in ambient light and stop mattering in the dark. Buy brightness for your worst viewing conditions, not for a spec sheet.

Contrast and colour, where the W2720i makes its case

This is the part the brochure will shout about, so it needs the most care.

BenQ quotes the W2720i at a 2,000,000:1 FOFO contrast ratio. The TK705i and TK710 are both at 600,000:1. That gap looks enormous, and I want to be clear about what it is and is not.

FOFO means full on, full off: the brightest white against a full black frame, measured separately. It is a manufacturer friendly number, not an in scene ANSI contrast you would measure with a checkerboard pattern. Measurable and visible are two different questions. So do not read that as "the W2720i has three times the contrast you will see". Read it as "BenQ has tuned the W2720i for deeper blacks", which it has, with light source dimming doing a lot of that work.

Colour tells the same story more plainly. Only the W2720i quotes DCI-P3, at 90% (BenQ). DCI-P3 is the wider colour space that 4K HDR films are actually mastered in. The other two quote Rec.709, the older HD colour space, at 95% for the TK710 and 98% for the TK705i. For HDR film accuracy, the W2720i has the real edge here, on paper and by design.

The W2720i also carries the film focused picture modes, including FILMMAKER MODE HDR, which exists specifically to stop the projector from "improving" the image past what the director intended. If you care about that, you are exactly the person this projector was built for.

Comparison table of BenQ TK705i, TK710 and W2720i showing brightness, contrast, colour coverage, throw ratio, input lag, smart platform and indicative price, from BenQ official specifications.

Throw ratio, or will it even fit your room

This is the spec people ignore until the projector arrives and sits in the wrong place.

The TK705i and W2720i have a 1.0 to 1.3 throw ratio. The TK710 is 1.15 to 1.5, so it wants a little more distance for the same screen size. In a smaller or shorter Indian room, that difference decides things.

A worked example, for a 100 inch 16:9 screen, which is about 2.21 m wide. These distances are calculated from the throw ratio times the screen width, not BenQ figures:

  • At a 1.0 throw, the projector sits about 2.2 m back.
  • At 1.3, about 2.9 m.
  • At 1.5, about 3.3 m.

So for that same 100 inch screen, the TK710 at its longest wants to sit roughly a metre further back than the TK705i or W2720i can. If your sofa is already against the wall, that metre is the whole conversation. Measure your room before you fall in love with a spec.

The smart platform gap nobody mentions in the showroom

Here is where the cheapest projector quietly pulls ahead.

The TK705i has Google TV built in. Switch it on, sign in, and Netflix and the rest are just there. Cleanest out of the box of the three, no extra box, no extra remote.

The W2720i does not have a smart OS built into the projector. It ships with an Android TV dongle (the QS02) as a standard accessory. It works, but it is a dongle hanging off the back, with its own power and its own quirks.

The TK710 has no smart platform at all. None. That is not a flaw so much as a decision: it assumes you are feeding it from a console, a player or a streaming stick you already own. Just budget for that streamer, because the projector will not stream on its own, and discovering that after delivery is a bad evening.

Input lag, and the surprise for gamers

If you game, the common wisdom is that the pricier projector must be the better gaming machine. Look at the numbers.

The TK705i is rated at 5 ms input lag at 4K 60Hz (BenQ). That is remarkably low, and it holds that 5 ms at 1080p 60Hz and 2K 60Hz too. For a console player sitting at 4K 60, the cheapest projector here is the lowest lag by a clear margin.

The TK710 and W2720i are higher at 4K 60Hz, around 16 to 18 ms (BenQ). Where they claw it back is high refresh at lower resolution: the TK710 drops to 4.2 ms at 1080p 240Hz, the W2720i to 6.5 ms at 1080p 240Hz. That is the competitive PC gamer's lane, 1080p at very high frame rates.

So the split is clean. A casual console gamer at 4K 60 is best served by the TK705i. A 1080p high refresh PC player who wants every millisecond will prefer the TK710's gaming modes and refresh handling. The expensive one is not "better at gaming" in general. It is better at a specific kind of gaming.

The laser lamp myth, cleared up

You will hear "get the laser, you never change a lamp". True, but misleading here, because none of these three uses a traditional replaceable lamp.

The TK710 is laser, rated 20,000 hours by BenQ. The TK705i and W2720i are 4LED, rated 20,000 hours Normal and up to 30,000 hours in ECO (BenQ). So on paper the two LED units last at least as long. "Laser saves you lamp changes" is not a real separator in this trio. The TK710's laser advantage is its brightness and how well that brightness holds, not any lamp cost you are avoiding, because there is no lamp to avoid on any of them.

On sound, quickly: the TK705i and W2720i carry twin speakers, the TK710 a single 5W. All three are fine as a stopgap and none of them replaces real speakers, which we would always pair with the projector anyway. A Rs 2 lakh projector deserves better than its own built in speaker, the same way a good car deserves better than the stock horn.

Decision guide matching each BenQ projector to a room type, a bright living room to the TK710, an everyday room to the TK705i and a dark cinema room to the W2720i.

Which one, and when

Practical rules, matched to the room rather than the price tag:

  • Bright living room, windows, sport and big screen gaming: the BenQ TK710. The brightest of the three, laser, with the gaming picture modes and the lowest lag at high refresh. Just leave it room to sit back, and plan for an external streamer.
  • Normal living room, mixed use, you want it simple: the BenQ TK705i. Cheapest, Google TV built in, 5 ms lag at 4K 60, sits close thanks to the 1.0 to 1.3 throw. For most Indian homes this is the sensible default, not the compromise.
  • Dark, controlled room, film first: the BenQ W2720i. The deepest blacks BenQ is claiming here and the only one with DCI-P3 colour and FILMMAKER MODE, which is what film accuracy actually wants. Give it darkness or you are paying for contrast you will not see.

Notice what that leaves us with. The cheapest projector is also the smartest out of the box and the lowest lag at 4K 60. The dearest is the specialist that only shines in the dark. That is the whole point: this is not cheap versus premium, it is three tools, and the price order is not the quality order.

One note on the prices above. They are indicative India MRP: about Rs 1,99,990 for the TK705i, Rs 2,49,000 for the TK710 and Rs 2,89,000 for the W2720i. Current store pricing may be lower, so check the product page for the live number. Warranty applies as per brand and distributor policy.

The next step without the hard sell

If you already know your room, look at the three on their product pages linked above and pick the tool that matches it. If you are not sure which fits, that is the normal situation, not a failing, because the right answer turns on your room size, your ambient light, your screen size and your throw distance.

That is what our free consultation is for. Tell us the room and the use, and we will tell you which of these three belongs in it, even when the honest answer is the cheapest one. That is advice I would give the same way whether or not it made us a rupee.

Leave a comment

All comments are moderated before being published

Join Our WhatsApp Channel

  • Exclusive AV deals
  • Pro tips for your home theater & stereo setup
  • Industry news & honest insights
  • Setup advice straight from the experts
    Click Here!